Zhontuo Highway guardrail cold roll forming machine

Zhontuo Highway guardrail cold Roll Forming Machine


Zhongtuo Highway guardrail cold roll forming machine roof steel machine[/url] is composed by decolier device, leveling feeding device,punch and cutting device, roll forming device and receiving platform and electric transmission device.The inner diameter of hydraulic automatic decolier is 450-650mm, it can load 8-12 ton weight`s material.Levelling feeding device is 17 shaft leveling, automatic feeding, the leveling shaft`s diameter is 90mm, and the motor power is 3kw. Punch and cutting is integration, automatic hydraulic punch cutting. The hydraulic pump`s max working pressure is 25Mpa. Roll forming : roller step is 12,mould bearing steel, high strength and wear resistance, Xingxing cycloid reducer. The power is 18.5kw. Two chain transmission, working stable, no friction, low noise. The computer adopts PLC frequency controlled, touch screen.The whole equipment is about17.5 meters*1.2meters*1.5meters.The weight is about 20 tons.


Zhontuo Highway guardrail cold roll forming machine


Zhontuo Highway guardrail cold roll forming machine


Zhontuo Highway guardrail cold roll forming machine


Technical Parameters

1 Main moter power: 18.5KW

2 Hydraulic station power: 11KW

3 Hydraulic oil pump: CB-E310

4 Sprocket: P-50.8

5 Roller station: 12

6 length of production line:17.5m

7 Diameter of principal axis:95MM

8 Material of roller: GCr15

9 Processing speed: 6-8m/min

10 Thickness: 0.3-4mm

11 hydraulic oil pump: CB-E310

12 material of blade: Cr12

13 Equipment parts: 5T decoiler, roll forming machine, punching machine, leveling machine, hydraulic cutter, hydraulic station , computer control system, counter.



High Frequency Welding Tube Mill

Our High Frequency Welding Tube Mill is intended for manufacturing of round pipe of Φ16mm-Φ127mm with thickness of 0.5 mm–5.0 mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths. 

Finished product can be of round, square or rectangular pipes.

High Frequency Welding Tube Mill

High Frequency Welding Tube Mill

a) High Frequency Welding Tube Mill Specifications:
Pipe diameter: Ø16–Ø127mm
Pipe Thickness: 0.5– 5.0mm
Pipe Length: 6-9m

Length Tolerance: 0-3mm

High Frequency Welding Tube Mill

b) High Frequency Welding Tube Mill Steel Tape Specifications:
Material: Low Carbon steel (δb≤500Mpa, δs≤235Mpa)

Inner diameter:   Î¦580-Φ610mm

Outer diameter:   Î¦900-1500mm
Strip steel thickness: 0.5mm-5.0mm

The maximum weight: 5.0 tons

High Frequency Welding Tube Mill

c) High Frequency Welding Tube Mill Electricity:
Dynamic power:  AC380V±10%, 3phases, 50Hz±10%
Control Power: AC220V±10%, one phase, 50Hz ±10%

Electric installed capacity: appro 450KW

High Frequency Welding Tube Mill

e) High Frequency Welding Tube Mill Cooling water:
Reservoir for High Frequency equipment:15 m³, one set
Reservoir for circulating cooling water:15 m³, one set
f) High Frequency Welding Tube Mill Compressed air:
Pressure: 0.4Mpa
Flow: 0.5m3/h

g) High Frequency Welding Tube Mill speed: 

30-90m/min

High Frequency Welding Tube Mill
Why choose to cooperate with us ?
1. We are professional manufacturer, so we can offer better price and after-sale service and shorter delivery time.
2. We have strong design & technical ability, we can design and manufacture as customer's requirement.
3. Our factory has been approved ISO 9001 certificate.
4. We have much experience for installation and training experience overseas.
5. We have successfully exported our machines to more than 90 countries, We all get good feedback.
6. We provide a free two years warranty for all our items.

7. OEM brand.

High Frequency Welding Tube Mill

High Frequency Welding Tube Mill FAQ:
1.How to get a quotation of tube rolling line ?
Give me the diameters and thickness for the pipe .
Other spicific requirements is welcome, such as the speed,power and voltage you want.
2. Terms of payment ?

30% T/T, Balance to be paid before shipping after inspection.Also we accept the payment L/C, O/A , D/P.

3. What is your after-sale service ?

High Frequency Welding Tube Mill warranty period is 24  months, if the broken parts can't be repaired, we can send new to replace for free, but you need to pay the express cost yourself. we supply the technical support for the whole life of the equipment.

4. How to visit your factory ?

a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.

Steel Pipe Roll Forming Machine

Steel Pipe Roll Forming Machine,Carbon Steel Pipe Making Machine, High Frequency Welding Pipe Making Machine,Steel Pipe Making Machine

Zhongtuo Roll Forming Machinery Co., ltd , http://www.rollsformingmachines.com

Posted on