Standard Lab Test Sieve Sample Vibrating Testing Sieve Equipment

Model NO.: SYS-200
Control: Manual Control
Weight: 0-100Kg
Power Source: AC220V
Voltage: 220V, 110V, 50 or 60Hz
MOQ: Only One Set
Port: Shanghai, Qingdao
Layer: Upto 8 Layers
Trademark: Hengyu
Transport Package: Wooden Case
Specification: 360*300*736
Origin: Xinxiang, China
HS Code: 84741000
Description of Standard Lab Test Sieve Sample Vibrating Testing Sieve Equipment

Testing Sieve Equipment is recommended for general laboratory use and for the fine sieving of size particles.


Testing Sieve Equipment includes
1. top cover 5. power cord
2. sieves with different mesh 6. locking handle
3. pan 7. others
4. machine body    
Standard Lab Test Sieve Sample Vibrating Testing Sieve Equipment
Standard Lab Test Sieve Sample Vibrating Testing Sieve Equipment


Technical Parameters
Number Name Unit Data
1 layers layer 1-8
2 diameter mm 200
3 granularity mm 0.038-3
4 noise dB 50
5 feed capacity(once) g 200
6 amplitude mm 5
7 voltage v 220
8 speed r/min 1400
9 power KW 0.12
10 overall dimension mm 360*300*736
11 weight Kg 36
Standard Lab Test Sieve Sample Vibrating Testing Sieve Equipment



The model of Testing Sieve Equipment enjoys the following advantages
1. Application: evaluation of size analysis
2. Typically requires 50-150g of sample material
3. Setting time limits for 1 second -9999 seconds
4. Up to 9 fractions in one sieving operation
5. One person can pick up it
6. Approved ISO 9001:2008, CE and BV certificates
7. Accurate mesh size guarantees precise analysis of sample


Please note that:
a. Turn off power supply when the machine is not in use for an extended period of time.
b. Clean the sieves after operation, so they will be ready for use next time.
c. Do not splash water on the machine to avoid current leakage.
d. Turn the machine off immediately in the event of unusual noises and inspect for blockage or Other irregularities.
e. Always ensure the lock nut is securely tightened before operation.


Does your sieve testing process sound like this?
1. You pour the sample into the top sieve, clamp the stack and turn on the shaker.
2. The shaker is finish
3. You clean each sieve and weigh the results.
4. Now you divide the weight of the sample retained in each sieve by the total weight to get % retained.
5. This process can take 10-15 minutes for a stack of 9 sieves.    


If you need one set of Testing Sieve Equipment, please let's know the following requirements:
1. How many sieves you need at once
2. The mesh size of each sieves
3. Please suggest the voltage in your plant
 Standard Lab Test Sieve Sample Vibrating Testing Sieve Equipment

Solenoid Coil 12 to 12.9mm

Schrader Valve Cores,Electromagnetic Coil,High Frequency Air Coil Inductor,High Precision Solenoid Coil

Brando Hardware Co., Ltd. , http://www.nbbrandohydraulic.com

Posted on