CNC machine tool cooling device cleaning

The cooling device of the CNC machine tool is just as important as the lubricating device. Good cooling can improve the machining quality of the workpiece and the service life of the machine tool components. Under normal circumstances, the daily maintenance of the cooling device is mainly the replenishment and replacement of the cooling liquid and the cleaning of the filtering device.

So when should the cooling device be maintained? 1. Observe the oil mark on the front of the tank. When the cooling water decreases, it should be added in time. Under normal circumstances, the configuration of the water outlet around the main shaft should at least make the oil filter of the cooling pump inlet completely submerged.

2. When the cooling water is contaminated and deteriorated, it should be replaced in a timely manner. The screw plug below the water tank should be removed to discharge the waste liquid. After cleaning the water tank, a new, clean coolant can be filled.

3. The cooling water tank is divided into two chambers: the water tank and the pump box. It is easy to raise the filter when it needs to be cleaned. The cleaning is very convenient. In addition, an oil filter is installed at the entrance of the cooling pump. The above two devices are used for a certain time in the machine tool. After a timely inspection and cleaning.

4. In general, the oil filter and filter should be cleaned once every two months.

The maintenance of the machinery is different, but there are many common points, so the maintenance of CNC machine tools is also very important.

KC/KWB series Industrial Chiller is mainly applied in Plastic & Rubber industry; it can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency. They are also widely used in Metal working, Mechanical & Engineering, Chemical & Pharmaceutical, Food & Beverage, Laser, Electronics industry, Textile, Electroplate, Semi-conductor testing, Water jet, Vacuum coating, Construction and Military.

Design features

¨ Adopted world famous brand compressors and high efficiency condenser and evaporator, ensure high cooling efficiency, low energy consumption, low noise and long service life.

¨ Chilled water temperature range 5℃ to 35℃.

¨ R22 charged, CFC free type R407C, R410A, R404A, R134A for option, high cooling efficiency.

¨ Over sized evaporator and condenser ensure the Chiller unit running under 45C high ambient temperature.

¨ Microcomputer control system offering accurate temperature stability within Â±1℃.

¨ Low noise and big volume air blower.

¨ Standard equipped Iron pump, stainless steel or high lift pump for option.

¨ Multi-protection devices ensure the chiller unit running safely.

¨ The innovative evaporator-in-tank configuration ensures a steady water temperature offered, as the evaporator also cools the tank itself, reduces ambient heat gain, and increases the efficiency.

¨ KWB Water Cooled Industrial Chiller adopted shell and tube condenser, features speed heat dissipation and high cooling efficiency, it is good to be used in High ambient temperature area with abundant water.

¨ KC Air Cooled Industrial Chiller adopted aluminum fin/copper tube type condenser, easy for cleaning and installation.

¨ Power supply: 1PH 220V/50HZ-----1/2HP to 2HP

                 3PH 380V/415V 50HZ-----3HP to 60HP

Industrial Water Cooling Chiller

Industrial Water Chiller,Industrial Water Cooling Chiller,Water Cooled Industrial Chiller,Pcb Industry Chiller

Shenzhen city KayDeli Refrigeration Equipment Co.,Ltd. , http://www.kaydelichiller.com

Posted on