![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
| Specifications of Bearing |
SNL506 Split plummer block housings SNL507 Split plummer block housings SNL508 Split plummer block housings SNL509 Split plummer block housings SNL510 Split plummer block housings SNL511 Split plummer block housings SNL512 Split plummer block housings SNL513 Split plummer block housings SNL515 Split plummer block housings SNL516 Split plummer block housings SNL517 Split plummer block housings SNL518 Split plummer block housings SNL519 Split plummer block housings SNL520 Split plummer block housings SNL522 Split plummer block housings SNL524 Split plummer block housings SNL526 Split plummer block housings SNL528 Split plummer block housings SNL530 Split plummer block housings SNL532 Split plummer block housings
Specifications of SKF SAF622 SAF624 SAF626 SAF628 SAF630 SAF632 SAF634 housing |
Product name | split plummer bearing housing SAF622 SAF624 SAF626 SAF628 SAF630 SAF632 SAF634 |
| d-Bore | standard | |
| Length | standard | |
| Width | standard | |
| Brand name | SKFÂ | |
| Material | chrome steel | |
| Weight | standard | |
| Hardness | 58~62 | |
| Quality standard | SGSÂ Â ISO9001 |
| Showing of Bearing |
Â
| Parameters of Bearing |
| SNLÂ block |
shaft (mm) |
bearings |
A (mm) |
L (mm) |
H (mm) |
Weight (kgs) |
Seal | End Cover |
| SNLÂ 3134 | 115 | 22326Â K | 230 | 510 | 333 | 69,5 | TSÂ 34/115 | ETSÂ 34 |
| SNLÂ 3136 | 125 | 22328Â K | 240 | 530 | 353 | 77,5 | TSÂ 36/125 | ETSÂ 36 |
| SNLÂ 3138 | 135 | 22330Â K | 260 | 560 | 375 | 97,5 | TSÂ 38/135 | ETSÂ 38 |
| SNLÂ 3038 | 140 | 22232Â K | 240 | 530 | 353 | 77,5 | TSÂ 38/140 | ETSÂ 38 |
| SNLÂ 3140 | 140 | 22332Â K | 280 | 610 | 411 | 123 | TSÂ 40/140 | ETSÂ 40 |
| SNLÂ 3040 | 150 | 22234Â K | 260 | 560 | 375 | 97,5 | TSÂ 40/150 | ETSÂ 40 |
| SNLÂ 3048 | 150 | 22334Â K | 290 | 640 | 434 | 139 | TSÂ 48/150 | ETSÂ 48 |
| SNLÂ 3134 | 150 | 23134Â K | 230 | 510 | 333 | 69,5 | TSÂ 34 | ETSÂ 34 |
| SNLÂ 3234 | 150 | 23234Â K | 260 | 560 | 375 | 97,5 | TSÂ 40/150 | ETSÂ 40 |
| SNLÂ 3048 | 150,813 | 22334Â K | 290 | 640 | 434 | 139 | TSÂ 48/5.15/16 | ETSÂ 48 |
| SNLÂ 3134 | 150,813 | 23134Â K | 230 | 510 | 333 | 69,5 | TSÂ 34/5.15/16 | ETSÂ 34 |
| SNLÂ 3234 | 150,813 | 23234Â K | 260 | 560 | 375 | 97,5 | TSÂ 40/5.15/16 | ETSÂ 40 |
| SNLÂ 3138 | 160 | 22236Â K | 260 | 560 | 375 | 97,5 | TSÂ 38/160 | ETSÂ 38 |
| SNLÂ 3036 | 160 | 23036Â K | 230 | 510 | 333 | 69,5 | TSÂ 36 | ETSÂ 36 |
| SNLÂ 3136 | 160 | 23136Â K | 240 | 530 | 353 | 77,5 | TSÂ 36 | ETSÂ 36 |
| SNLÂ 3236 | 160 | 23236Â K | 260 | 560 | 375 | 97,5 | TSÂ 38/160 | ETSÂ 38 |
| SNLÂ 3138 | 163,512 | 22236Â K | 260 | 560 | 375 | 97,5 | TSÂ 38/6.7/16 | ETSÂ 38 |
| SNLÂ 3036 | 163,512 | 23036Â K | 230 | 510 | 333 | 69,5 | TSÂ 36/6.7/16 | ETSÂ 36 |
| SNLÂ 3136 | 163,512 | 23136Â K | 240 | 530 | 353 | 77,5 | TSÂ 36/6.7/16 | ETSÂ 36 |
| SNLÂ 3236 | 163,512 | 23236Â K | 260 | 560 | 375 | 97,5 | TSÂ 38/6.7/16 | ETSÂ 38 |
| SNLÂ 3140 | 170 | 22238Â K | 280 | 610 | 411 | 123 | TSÂ 40/170 | ETSÂ 40 |
| SNLÂ 3148 | 170 | Pneumatic Cylinder Tube This type of product showcases the aluminum alloy cylinder barrels of the three international brands FESTO/SMC/AIRTAC, explains our production process and experience, and shares the details of our cylinder aluminum tube production.Pneumatic Cylinder Tube.
Product Category Round cylinder, square cylinder, Mickey Mouse cylinder, SDA, CQ2, ADVU and other compact cylinder, double rod cylinder and compact guide cylinder, stainless steel honing hydraulic pipe, etc. Characteristics of different types of cylinder pipes Circular type It is commonly used for SC series pull rod cylinders and aluminum micro pneumatic cylinders. It has a simple structure, low cost, and easy installation. The inventory is large, so we can deliver quickly for most types. The maximum inner diameter is 320mm. Square type Mainly used for DNC series and ISO series cylinders. Square cylindrical tubes are much stronger and have more precise dimensions than ordinary circular cylindrical tubes. The inner wall is polished smooth and wear-resistant after oxidation treatment. It can be matched with most ISO15552 and ISO6431 cylinder front and rear bases. The installation thread can be directly machined on the square cylindrical tube without the need for another rod to fix it. In addition, there is a mounting slot for the magnetic spring switch on the cylindrical tube, which makes it easier to directly fix the magnetic spring switch on it without any bracket. The operation is very simple. The aperture range is 32mm to 125mm. Mickey Mouse shaped cylindrical tube The cross-section of the Mickey Mouse cylindrical tube is similar to that of the Mickey Mouse, and is therefore commonly referred to as the Mickey Mouse cylinder, used for assembling SI, SU, and ISO series cylinders. The characteristic of this cylinder is the use of four protruding ribs to replace the tie rod on the tie rod cylinder. In this way, it can greatly reduce the problem of uneven installation force and is easier to assemble than SC cylinders. The cost of the Mickey Mouse cylinder is between the SC circular cylinder and the DNC square cylinder, and its strength is much stronger than the SC type. The range of aperture (inner diameter) is 32mm to 320mm. Please note that although the appearance of the Mickey Mouse cylinder pipes in the SI and SU series is the same, there are slight differences in the specific installation dimensions, which cannot be replaced arbitrarily to avoid assembly problems. Compact cylinder pipes such as SDA and CQ2 Compact cylinders are special. Their front and rear covers or bases are fixed with elastic retaining rings, unlike other cylinders that are fixed with threads or rods. The aperture range is usually 32mm to 100mm. Double rod cylinder and compact guide cylinder The biggest advantage of a double rod cylinder is that it can ensure parallel movement of the cylinder piston without any rotation or oscillation. Common double rod cylinder barrels include TN, CXS, MGP series, etc. Stainless steel cylinder tube Stainless steel cylinder tubes are generally used for assembling MA and DSN series stainless steel micro pneumatic pressure joint cylinders, and can also be used for assembling all stainless steel series pull rod cylinders or hydraulic cylinders. Due to the much higher pressure of hydraulic cylinders, the wall thickness of hydraulic cylinder pipes is also much thicker than that of ordinary cylinders. Stainless steel cylinder pipes are available in three grades: 304, 316, and 316L. Unless otherwise specified, the default material is stainless steel SUS304. Pneumatic Cylinder Tube,Pneumatic Cylinder Tubing,Pneumatic Cylinder Pipe,SMC Aluminium Pipes Tubes Foshan Weiyingjia Technology Co., Ltd , https://www.wyspneumatic.com |
