Injection Plastic Jumbo Crate Mold Manufacturer

Model NO.: J1803203
Runner: Hot Runner
Design Software: UG
Installation: Fixed
Certification: ISO
Standard: DME
Customized: Customized
Part Name: Crate
Mold Design: 7days
T1 Sample Time: 60days
M/C: 800t
Machine Equipment: CNC,EDM,Wire Cutting Machine,Drilling Machine
Trademark: JSLMOULD
Transport Package: Wooden Crate
Specification: Dme
Origin: Taizhou, China
HS Code: 8480719090
Plastic jally crate mould
Provide mould core & cavity steel certificate
Provide mould trial video and good after-service.

High quality
Reasonable price
Good after-sale service
On time delivery


JSL Mould Quality Control
For the Q/C of mould, there are 3 steps:

1. Mould Material Q/C

- Mould Steel Checking(Hardness, flaw detection)

- Mould Standard Spare Parts Checking(hardness, size, flaw checking)

2. Mould Making Process Q/C

- design checking (part design, mould design, mould engineering drawing)

- checking each part of mould's size after machining, according to 2D drawing

- mould testing(check mould running condition)

3. Check with customer's requirement again before mould shipping.
Product Name Injection Plastic Jumbo Crate Mold 
Product material PE
Core& Cavity Steel 718
Steel hardness: HRC34-38
Mould Standard DME
Cavity Number 1*1
Injection System Point gate
Ejector System Eject plate
Cycle Time 50 second/shot
Tooling lead time 60 days
Mould life 500, 000 times
Quality assurance ISO9001
Our Advantage 1. High quality
2. Reasonable price
3. On time delivery
4. Good After-sale service
5. Strict quality control
6. All the mould are automotic.
Offer you In-time response on letters, telephone calls or fax
In-time supply the quotation and mould designs
In-time communication on the technical points
In-time sending pictures for the mould machining progress and mould finishing schedule
In-time mould test and sample delivery
In-time mould delivery
  For more information please contact us.
Injection Plastic Jumbo Crate Mold Manufacturer
Injection Plastic Jumbo Crate Mold Manufacturer
Injection Plastic Jumbo Crate Mold Manufacturer
Injection Plastic Jumbo Crate Mold Manufacturer
Injection Plastic Jumbo Crate Mold Manufacturer
 

Ball Joint:

The main function of the Ball Joint is to realize the upper and lower bounce and turn motion of the wheel.

Structure:

There are two kinds of main structure of the ball joint: one is spherical joint combined with the whole joint, the other is a hemispherical joint combined. Before using helical spring structure preloading and wear compensation, now what is widely used is elastic and lubrication synthetic resin tee which can reduce the cost and improve the maneuverability and stability. In addition, the material and shape of the dust cover, oil type has greatly improved, cancel the grease nozzle,of free maintenance.

Ball joint is mainly composed of an end cover, ball pin, tee and dust cover form.

 

Connection mode:

Due to the size and type of the spatial arrangement of the Control Arm, ball joint is connected with the control arm is as follows, bolt or rivet connection, directly pressed into the control arm and the control arm as one. From the ball head pin development trend, now more and more with the control arm as a whole the fixed ball pin, to meet the needs of small space occupation, convenient loading and low cost requirements. But the type of ball head pin of the service life of the demand is higher, so as to avoid the abrasion of the ball head pin or a failure. The whole control arm and the steering knuckle ball pin connection adopt 1/6~1/10 taper fitting manner.

 

Perforce Requirement:

It should have sufficient swing angle, in order to meet the requirements of wheel jumping up and down; small friction moment is to ensure that the steering important factors and easy manipulation; should not be caused by clearance of wheel shimmy and abnormal noise; good sealing performance, to ensure that the ball head pin can be used in water and low temperature environment should have the strength and durability; enough to withstand the force and vibration, the wheel came.

 

Manufacturing:

For independent suspension front and rear suspension of the ball head pin is an important safety component protection, must be used to ensure the quality of the production process.

1)Attention to the full joint. For hot forging, cold forging, pressing or casting method for manufacturing blank, then cutting. Control of materials and heat treatment is a key factor.

(2) Ball pin machining way for cold forging products is the mainstream. In the heat treatment of the material control is the key factor, in addition to the products of conical connection type, its size accuracy is the key factor of stable fatigue limit, need to take measures in size control of cold forging;

(3) Polyacrylate and polyester elastomer synthetic resin material structure with elastic effect to become the mainstream. In this structure, need tee shape, material design measures, to ensure the production of stable precision molding in the mold, making the fine The degree of control is the key factor.

(4) The structure of ball joint assembly, assembly methods are different, but most of the rolling wheel is the main way. As to prevent the process of different products, bad products, assembly error and so on, take corresponding measures to prevent mistakes, also used to check the torque. Shake angle digital inspection machine, and combining them together to set in the procedure.

Ball Joint


Ball Joint

Ball Joint,Rod End Joint,Rack End Joint,Auto Tie Rod End Ball Joint

VESTA Motoring Ltd , http://www.vesta-industry.com

Posted on