Driving in a foggy day and driving a sewage truck is also a headache. There are three tricks for healing tips.

Fog weather, low visibility, which brings great inconvenience to the sewage suction truck, suction truck driver driving. There are many traffic accidents in fog, so be careful when driving in fog.

Before going out, you should check whether the safety equipment such as the sewage suction truck, suction truck lights and brakes are complete and effective. When the windshield, headlights and taillights are wiped clean. Carry triangle warning signs or other warning signs in the car. When you encounter sudden failure, stop and check, put a warning sign 50 meters before and after the car to remind other vehicles to pay attention. When driving a vehicle in the fog, the driver of a sewage suction truck or a suction truck driver must strictly abide by traffic regulations and speed limit, and must not drive an express train. The greater the fog, the shorter the visual distance and the lower the vehicle speed. Avoid using sewage suction trucks and suction truck high beam lights. This is due to the fact that the high beam is on the upper side, and the light that is emitted is reflected by the fog and forms a white one in front of the car. The person driving the car can see nothing more. When driving in foggy weather, be sure to use anti-fog lights, turn on front and rear fog lights, tail lights, wide-width and low-beam lights, use lights to increase visibility, see vehicles and pedestrians and road conditions in front, and make it easy for others to see themselves.

Timely parking. If the fog is too large, you can park the suction truck and suction truck at the same time, and turn on the low beam and emergency lights at the same time. After parking, get off from the right side and away from the road as far as possible. Never sit in the car to avoid being hit by a passing car. Wait for the fog to disperse or look better and then hit the road again. Use a horn. In the case of poor visibility in fog, diligently pressing the sewers and suction horns can serve as a warning to pedestrians and other vehicles. When other horns are heard, they should whistle to respond promptly. Driving position. When the two vehicles meet, they should press the horn to remind the opposite vehicle to pay attention and close the anti-fog lamp at the same time so as not to give the other party a dazzling sensation. If the speed of the other party is faster, it should take the initiative to slow down. Keep the distance. Sewage suction vehicles and suction trucks should drive at low speeds in fog, especially when maintaining a safe distance from the vehicle ahead. Do not get too close. Try to drive in the middle of the road. Do not drive along the roadside to avoid collision with the car that is temporarily parked on the roadside and waiting for the fog.

Avoid sewers and suction trucks blindly overtaking. If you find that the vehicle in front of you is parked on the right, you must not blindly walk around. Consider whether this car is waiting for the opposite to come to the car. When passing a vehicle parked on the roadside, after confirming that it has no intention of starting and there is no vehicle on the opposite side, press the horn at a proper time and bypass the low speed from the left side. In addition, please also pay attention to carefully track the lanes in the road, can not be rolling line, otherwise there will be the danger of colliding with the opposite car. When driving on bends and on slopes, you should decelerate early and avoid mid-speed shifts, parking or flameout. Drivers should avoid sewers and suction trucks to brake. When driving in fog, you should generally not slam on or loosen the throttle, and you must not make an emergency brake and hurry to hit the steering wheel. If you think that you really need to reduce the speed, slowly relax the throttle, and then lightly step on the brake several times in a row to achieve the purpose of controlling the speed, to prevent rear-end accidents.

it  is full range of Piston Rod  for the following type :

AAA) YANMAR DIESEL ENGINE     
K(D)L, KFL-T, 6MAL-H/T/HT/DT, S165-T/ST/EN,     
S185-ST/UT/ET, M200L-UN/SN/EN/M220L-UN/SN/EN / N 330 

     
BBB) DAIHATSU DIESEL ENGINE     
PS22/26/ DS18(A)/ DS(B)22/

DL20/22/28/ DK20   / DK 28 
     
CCC) NIIGATA DIESEL ENGINE     
 6L(M)25BX/6M28AFTE/BX/6M31X/EZ/EX/  31AFTE  /34AGT   
     
DDD) AKASAKA      
AH30/AH38/ AH40/D/F/  A31/34/37/41/ DM28/30/33/36/38/40(A)K/ DM46/  UEC37H-HB/ UEC 37/88H     
UEC 37LA/ UEC45LA/ UEC52LA/ UEC52HA/ UEC60HA/  UEC60LS/ UEC45HA/115 ALL UET TYPE     
     
EEE) MITSUBISHI    (KOBE AND AKASAKA ) 
45/75C/ 45/80D/ 52/90D/ 52/105D.E/

UEC37H-IIB/ UET37/88HA/UEC45HA.LA/ UEC52HA.LA/ S6B/      
ETC     
     
FFF) HANSHIN     
6LU(D)26/ 6LU(N)28A/ 6LU(D)32/6LU(D)35/ 6LU(S)38/ 40 / 6LU40/ 6LU46A/ 6LU50A/

6EL30/ EL(S)32     /6EL(S)35/ 6EL38/ 6EL40/ 6EL(S)44/50A/     

GGG) MAN B&W     
S35MC/L35MCE/L50MCE/ L60MCE/ 40/54A     
     
HHH) MITSUBISHI PURIFIER     
SJ700~SJ1800/SJ 2000


III)SULZER 

 RND 68 RND 76 RD 44



JJJ) MAKITA

GSLH – 633 637                 KSLH -633 637



Kkk) PIELSTICK

PC 2-5  PC 2-6


Piston Rod

Piston Rod,Piston Rod Parts,Hydraulic Cylinder Piston Rod,Automobile Cylinder Piston Rod Parts

ZhouShan HeCheng Machinery Co., LTD. , http://www.hcmarineparts.com

Posted on