![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
1, the correct selection, the characteristics required in addition to iron, their environment and separator iron removal is required taking the case of iron-containing material.
2. When there is more iron in the material, the self-unloading electromagnetic and permanent magnet separators (RCDC, RCDD, RCDF, RCYC, RCT, CFDL series) with continuous iron discharge capacity should be selected.
3. When there is less iron in the material, manual unloading electromagnetic and permanent magnet separators (RCDA, RCDB, RCDE and RCY series) should be used. Properly reducing the suspension height is beneficial to removing iron.
4, when the iron-containing material member small, the range should be used GJT metal detector and magnetic separator dump strong field with the use of energy saving, in addition to good effect of iron.
5. When the power capacity is limited, the permanent magnet separator should be used.
6. When the use of environmental dust is serious, the iron separator of fully enclosed structure, such as: RCDB, RCDE, RCDD, RCDF series electromagnetic products and RCYB, RCYD series permanent magnet products should be used.
7. When the iron remover is installed on the head of the belt conveyor, the driving force at the bottom of the iron remover should be non-ferromagnetic material because the material has a forward momentum and is loose.
8. When the iron remover is installed in the middle of the belt conveyor (ie, cross-arranged), in order to improve the iron removal effect, the WCG series non-magnetic linear idler can be added under the tape.
9. For non-ferromagnetic metal materials that can not be adsorbed by iron remover, GJT series metal detectors should be used for detection, and the machine will be manually removed after alarm or shutdown.
10. Iron-absorbing iron has the following characteristics: it is easy to suck short and long; the tip is easy to ball; the suction is easy to be static. In the case of high requirements for iron removal, the specifications of the iron remover should be appropriately increased.
Or use multiple stages of iron removal.
11. When multi-stage iron removal is adopted, the iron removal force of the latter stage should be higher than that of the former stage. Otherwise, the iron removal effect of the latter stage iron remover is poor.
Rice Crushing Roll,Rice Thresher Component,Rice Mill Component,Rice Milling Process Head
Hunan Nongyou Machinery Group CO.,LTD , https://www.ricemill.nl