A special safety measure for the spray coating

Because of the mine painting in the west of the mine, because the paint is diluted with thinner, the vapor formed by the paint is flammable and explosive, has a pungent odor, and because of the poor ventilation of a west roadway, the workers and the walking during the operation The phenomenon of tears in the eyes, nose and tears of the personnel, through the leadership of the mine research, due to the irritating odor of the thinner operation, it is also flammable and explosive. To this end, special safety measures for the smelting and painting operation of Xixiayan Road are specially formulated.

First, technical requirements

1. Before the construction, check the two lanes of the roadway. After the inspection, treat the cracked or peeled off site, use cement to grout or fill the paint, and brush the uneven wall according to the standard.

2. The standard of roadway lighting is white under blue, that is, white paint above the waistline, blue paint under the waistline, and the waistline is red. (The waist line height is calibrated by the production department)

3. Protect the cable, pipeline and monitoring line of the construction site before spraying, otherwise construction is not allowed.

4. Painting work is required during construction. The use of paint and thinner materials is very low-flammable and explosive. Therefore, 2 sets of qualified 4kg dry powder fire extinguishers should be prepared during the operation. The staff must understand the use of fire extinguishers.

Second, security measures

1. All personnel involved in construction and management must be familiar with the content requirements and standards of this technical measure.

2. The duty team is the first responsible person for the safety production of the team. The team leader must strictly check the work on duty according to the standard.

3, the shift monitor, after the succession of the successor should check whether the work to work according to the standard construction, whether the work site has uneasy hidden dangers, find the problem and then work.

4. When the cart is used, the following rules must be observed:

(1) Only one car can be pushed once. Do not push the cart on both sides. The spacing of the same cart is not less than 10m.

(2) Always pay attention to the front when strolling. When starting a cart, parking, dropping, finding someone in front, and approaching the switch, the lane, the carter must slow down and signal in time. Stop when you find obstacles or mine cars falling off.

(3) When parking at this location, it must be secured with a wooden wedge.

(4) It is strictly forbidden to fly the car.

5. A Xiyan Lane is an important traffic artery for transportation. Always pay attention to the vehicle management of the site during construction. Especially when the battery car passes, the construction personnel must stop working, hide in a safe place and confirm the track is smooth. To ensure safe passage to ensure the safety of personnel during construction.

6. Before the end of each class, you must ensure that the work is completed, the materials are clean, and the site is cleared.

7. During the construction process, the passing vehicles shall not be affected. When the battery vehicles pass, they must contact the construction personnel in time to align the signals, and must not accidentally injure the personnel and cannot affect the production.

8. When working at the top of the roadway, pay attention to the safety of working at heights. Do not place heavy objects on the scaffolding to avoid falling and hurting pedestrians. Work must pay attention to safety at high altitude, avoid emptying, loose scaffolding, etc. Proper and in place.

9, in addition to serious implementation of the security measures, but also must be in strict accordance with the relevant provisions of the coal mine "big three" in the regulations.

Use 1

Aluminium Quenching Furnace

Huzhou Zhongke Furnace Industry Technology Co., Ltd , https://www.zkfurnace.com

Posted on