A scene of a frightened drive at night calls you to abuse the high beam!

Does anyone have to drive off at night to get off the bus and try to get out of the car?! What is the harm caused by the abuse of high beam light to the driver? In the end, Xiaoi asked her to ask her, Damian. It is the sauce purple that drops, the night driver encounters the high beam light, is the equivalent of blindfolded driving nearly 100 meters. Driving abusing high beam lights is almost equal to murder!

For this reason, some witty riders have found a new trick in the abuse of high beam lights.

1.jpg

Do you dare to abuse the high beam light? If you don’t see such a scene, you may want to scare the urine? What can you do if you don’t have these deterrence and alert methods and encounter other vehicles with high beam headlights? High beams will increase the chance of dangerous accidents. If you want to save your life, you also need to know more!
30% of drivers are "light bats"
“Your distant lights are hurt in the glare, and the white light of the high beam flashes and shakes. The night is too long and the lights are too confused, who is desperately desperate in the crash...” According to field investigations, at least 30% of the drivers chaotically used the high beam. light. And like the "lamp tyrant" that often drives high-beam lights, part of it is the "newbie" and the new car that just started driving. The second group of people may be some high-end owners who “show off”. The headlights of high-end cars are generally brighter, so they are particularly dazzling. The third category is large truck drivers. Such vehicles have a large body. In order to get a better view, they often drive high beam lights. The general headlights facing the car are not “adversaries” at all.

Misuse of high beam lights to drive drivers to “blind” causes many accidents Many drivers have had the experience of being dizzy with the high beam lights of the oncoming car or the rear car at night. This is still light. If you are not lucky, accidents are inevitable. According to relevant statistics, at present, among the traffic accidents that occur in China at night, they account for 30% to 40% of the high-beam lights.

In accordance with the "Regulations for the Implementation of the Road Traffic Safety Law," it is possible to change the use of high and low beam lights when passing a vehicle. In the case of low visibility, high beam lights can be used, but high beam lights must not be used when the distance between the rear and the preceding vehicle is short. light. If you use the high beam at night when you are not in accordance with the regulations, you will be fined 100 yuan in accordance with the law, and 1 point will be recorded.

What should a driver do if he encounters abuse of a high beam?

1. When there are no central isolation facilities or roads without central lines, high beams cannot be used within 150 meters from the opposite direction.

2. High-beam lights cannot be used when there are no central isolation facilities or narrow bridges, narrow roads and non-motorized vehicles without central lines.

3. Through intersections controlled by traffic lights, high beams cannot be used during cornering.

4. When a motorized vehicle does not have street lamps at night or has poor lighting or is driving under low visibility conditions such as fog, rain, snow, sand, etc., the high beam cannot be used when the rear car with the same direction is traveling at a short distance from the preceding car.

5. Through the sharp bends, slopes, arch bridges, crosswalks or junctions without traffic signal control, high beam lights and low beam lights shall be used interchangeably.

1, flash a few high beam lights prompt each other, but do not open long counterattack.

2. It is difficult to see what is happening in front of you. Slow down or stop by, especially when you come across an SUV or a big car, you must remember safety first and be careful about passing the car.

3, equipped with intelligent anti-glare products, installed in the position of the sun visor, can effectively prevent drivers from suffering from strong light damage.

The use of high beam is forbidden in five situations!

Composite Nylon Plastics Material PBT

properties of PBT
It has high material handling capabilities which will reduce material cost by a good margin.
It is stress-resistant and has great machining and processing ability.
It posses nine sets of short-term mechanical properties like High-strength, toughness, and stiffness.
It has impressive creep resistance, moisture absorption, and excellent dimensional stability.
Polybutylene Terephthalate helps in protecting electrical components with high electric resistance.
Appropriate flame-resistant grades are also available in specific cases.
Good UV blocking coupled with good heat ageing behaviour
PBT material has high heat deflection temperatures and a high-temperature index, which helps resist short-term thermal excursion and longer-term heat exposure.
Decent durability in tough chemical environments, especially in automobile underhood applications.
Fantastic chemical resistance against chemicals like alcohols, aromatic hydrocarbons, ketones, diluted acids, oils, solvents, greases. That makes it highly suitable for making plastic parts in constant contact with oils and gasoline.

Pbt G30,Pbt Resin,Pbt Gf30 V0,Polybutylene Terephthalate Resin

Zhejiang Xinli New Materials Co,.Ltd , https://www.shinylon6.com

Posted on