![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Product Description
1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid water Valve is to control On/Off of air and inert gas. This solenoid valve has one1/4" inch inlet and one 1/4" inch outlet port. Valve stays close when the coilis de-energized- and it opens when energized. Has two holes in the bottom andcan be mounted in any position.
Item |
TOP quality water flow control 12v solenoid float valve |
Size Range |
DN10 to DN50, 3/8" to 2" |
Operating Pressure |
Low Pressure, 0 to 1.0MPa (0 to 150PSI) |
Number of Ways |
2/2 Valve, Two Ways Two Position |
Valve Operation Type |
Normally Open, Closes When Energized |
Body Material |
Stainless Steel |
End Connection |
Female Thread |
Coil Voltage |
DC24V (±10%), AC110-220V, 50/60Hz |
Applicable Media |
Control of Water, Air, Gas, Oil, Liquid, Steam |
Temp. of Media |
Range from -10 to +80°C (14 to 176°F) with NBR Sealing |
Ambient Temp. |
Range from -20 to +60°C (-4 to 140°F) |
Protection Class |
IP67, Explosion-protected Construction are Available |
Application |
Food & Beverage, Water & Wastewater, Ultra Pure Water, Desalination, Chemical, Textile, Pharmaceutical, Pulp & Paper, Mining, Boiler and Power Industries |
Installation and maintenance:
1. The pipe must be clean and clean.
2. Install as needed, but it is best to make the actuator face up. Notice the flow direction.
3. Connect the valve to the pipe, note the actuator need to be removed only if the user has a special request.
4. Before opening or repairing the Angle valve, cut off the fluid and control the air source and reduce the pressure in the piping system.
We will give you a reply within 24 hours after receiving your inquiry.
Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products.Â
Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent
We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed
2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year
3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.
4.Which port are you shipping?
Q:Ningbo or Shanghai Port
5.Can we print the LOGO on products?
Yes, and we support the OEM.
6.Do you have any certification?
Q:Yes, we have 12Â patents for the products.
7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .
8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail
9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.
10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.
Product Description
1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid water Valve is to control On/Off of air and inert gas. This solenoid valve has one1/4" inch inlet and one 1/4" inch outlet port. Valve stays close when the coilis de-energized- and it opens when energized. Has two holes in the bottom andcan be mounted in any position.
Item |
TOP quality water flow control 12v solenoid float valve |
Size Range |
DN10 to DN50, 3/8" to 2" |
Operating Pressure |
Low Pressure, 0 to 1.0MPa (0 to 150PSI) |
Number of Ways |
2/2 Valve, Two Ways Two Position |
Valve Operation Type |
Normally Open, Closes When Energized |
Body Material |
Stainless Steel |
End Connection |
Female Thread |
Coil Voltage |
DC24V (±10%), AC110-220V, 50/60Hz |
Applicable Media |
Control of Water, Air, Gas, Oil, Liquid, Steam |
Temp. of Media |
Range from -10 to +80°C (14 to 176°F) with NBR Sealing |
Ambient Temp. |
Range from -20 to +60°C (-4 to 140°F) |
Protection Class |
IP67, Explosion-protected Construction are Available |
Application |
Food & Beverage, Water & Wastewater, Ultra Pure Water, Desalination, Chemical, Textile, Pharmaceutical, Pulp & Paper, Mining, Boiler and Power Industries |
Installation and maintenance:
1. The pipe must be clean and clean.
2. Install as needed, but it is best to make the actuator face up. Notice the flow direction.
3. Connect the valve to the pipe, note the actuator need to be removed only if the user has a special request.
4. Before opening or repairing the Angle valve, cut off the fluid and control the air source and reduce the pressure in the piping system.
We will give you a reply within 24 hours after receiving your inquiry.
Packing & Delivery:
Delivery Details : 3-5 working day for sample, 2-7 working day for small products, 15-30 working day for mass products.Â
Packaging Details:shrink wrapped - carton - plywood case or according to customers' requirement.
Usually we ship your order by sea or by air...
We'll tell you the tracking number once your order has been sent
We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal
FAQ:
1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed
2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year
3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.
4.Which port are you shipping?
Q:Ningbo or Shanghai Port
5.Can we print the LOGO on products?
Yes, and we support the OEM.
6.Do you have any certification?
Q:Yes, we have 12Â patents for the products.
7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .
8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail
9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.
10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.
Drum Brake Electric Tricycle cheaper, but also in line with traditional design. Tricycle car in the braking process, due to the role of inertia, the front wheel load usually accounts for 70% -80% of the total load of the tricycle, the front wheel braking force than the rear wheel, rear wheel auxiliary brake, so tricycle production Manufacturers in order to save costs, the brake on the front disc drum. High braking efficiency, complex structure, heavy weight, easy to implement hand brake. To slow down the moving parts, stop or keep the device stopped, can play a role in protecting traffic safety.
Drum Brake Electric Tricycle
Drum Brake Electric Tricycle,Frame Steel Electric Tricycle,Drum Brake Motorized Tricycles,Color Custom Electric Trikes
QuZhou Benneng Vehicle Co.,LTD , https://www.cn-ebikes.com