Multifunctional Double Pulse MIG Welding Machine Pm3000dp/5000dp

Model NO.: PM-3000DP/5000DP
Trademark: NGB
Specification: 590*280*700
Origin: China
HS Code: 8515390000
Model NO.: PM-3000DP/5000DP
Trademark: NGB
Specification: 590*280*700
Origin: China
HS Code: 8515390000
PM Series product introduction
Gubang has a great goal and is confident to dominate the development of welding technology. In the field of MIG/MAG,CUT and ARC, Gubang has achieved extraordinary achievements. For MIG/MAG welding, Gubang has developed revolutionary full digital PM series, PM-3000DP, PM-5000DP, PM-3500SP, PM-5000SP and regular  MIG-350S, MIG-500S,MIG-500PRO and achieved eight patented technologies;
PM series models are built-in expert system  and expert programs ,all have excellent  welding performance. PM series can weld carbon steel, stainless steel, alloy steel, aluminum and aluminum alloys, copper and other metals.

Multifunctional Double pulse PM-3000DP/5000DP Aluminum welding specialist performance and characteristics

1. Double pulse, single pulse, CO2 multiple welding modes optional.
2. Adopt high-speed dual-processor DSP(Digital Si--gn Processor), highly integrated in 32-bit MCU, through the precise function operation of micro-processor to control welding machine's each performance and working process, its control is unprecedented accurate and reliable .Excellent welding performance, excellent welding quality .
3.DP With expert data system ,PM-5000DP can store 10 groups of custom welding data.
4. Used to weld aluminum and aluminum alloys, copper, stainless steel, alloy steel, carbon steel. With 2 steps, 4 steps, special 4 steps Al. welding program, synergic welding function.
5.Special 4-step aluminum welding procedures: when welding aluminum, copper and good thermal conductivity metal, it is easy to lose heat when starting arc, the parent material is difficult to melt. With the special 4-step program, big current is used when starting arc , after the arc is started, the current is gradually reduced to normal welding current and then drop down to crater current to fill the crater when stop welding.
6, PM series with four roller wire feeder, and the dynamic response is several times of magnitude higher than traditional welding machines.
7, Can achieve the software upgrade of the welder, by changing the software to expand the welder function to meet a variety of different needs.
8, Suitable for artificial, mechanized, automated and robot welding industrials.
9, Widely used in stainless steel, galvanized sheet, chromium nickel steel and high alloy metal welding, and aluminum and aluminum alloy welding advantages are particularly evident.
PM-3000DP/5000DP Standard Accessories

 
Name PM-3000DP PM-5000DP
Closed 4 rollers wire feeder no 5m/50mm2 cable
Torch MB-24KD-3m
(Imported graphite wire feeding hose)
Water cooled 501D-3M
(Imported graphite wire feeding hose)
Earth Clamp 2.5M-25mm2/300A 2.5M-50mm2/500A
PM-3000DP/5000DP  Optional
PM-3000DP PM-5000DP
Cylinder tray rack (including large wheels) Integral trolley with cylinder tray rack (including large wheels)
NO Water tank WRC-300
CO2 regulator CO2 regulator
Argon regulator Argon regulator
NO Water cooling Fonius type torch AW5000-3M(USD30 higher than 501D)
PM-3000DP/5000DP Technical Parameter
Model PM-3000DP PM-5000DP
Voltage(V) 380V±10%   50/60Hz 380V±10%   50/60Hz
Input Power(KVA) 14 24
Rated Duty Cycle 60   60  
No-load Voltage(V) 60 70
Current Range(A) 20~300 20~500
Out put voltage Range(V) 14~30 14~50
feeding mode Push wire / push pool wire Push wire/ push pool wire
Gas(L/min) 10~20 10~20
Cooling Air cooling Air cooling/water cooling
Housing Protection Grade IP21S IP21S
Insulation Grade F F
L x W x H(mm) 590×280×700 550×280×590
Weight(Kg)) 35 42





                                                                                Front View 


Multifunctional Double Pulse MIG Welding Machine Pm3000dp/5000dp






                                                                           Left View 


Multifunctional Double Pulse MIG Welding Machine Pm3000dp/5000dp


                                           Right View 


Multifunctional Double Pulse MIG Welding Machine Pm3000dp/5000dp



                                               Top View 


Multifunctional Double Pulse MIG Welding Machine Pm3000dp/5000dp




                                                                        Wire feeder


Multifunctional Double Pulse MIG Welding Machine Pm3000dp/5000dp






                                                                              Water Cooler 


Multifunctional Double Pulse MIG Welding Machine Pm3000dp/5000dp
  PM Series product introduction
Gubang has a great goal and is confident to dominate the development of welding technology. In the field of MIG/MAG,CUT and ARC, Gubang has achieved extraordinary achievements. For MIG/MAG welding, Gubang has developed revolutionary full digital PM series, PM-3000DP, PM-5000DP, PM-3500SP, PM-5000SP and regular  MIG-350S, MIG-500S,MIG-500PRO and achieved eight patented technologies;
PM series models are built-in expert system  and expert programs ,all have excellent  welding performance. PM series can weld carbon steel, stainless steel, alloy steel, aluminum and aluminum alloys, copper and other metals.

Multifunctional Double pulse PM-3000DP/5000DP Aluminum welding specialist performance and characteristics

1. Double pulse, single pulse, CO2 multiple welding modes optional.
2. Adopt high-speed dual-processor DSP(Digital Si--gn Processor), highly integrated in 32-bit MCU, through the precise function operation of micro-processor to control welding machine's each performance and working process, its control is unprecedented accurate and reliable .Excellent welding performance, excellent welding quality .
3.DP With expert data system ,PM-5000DP can store 10 groups of custom welding data.
4. Used to weld aluminum and aluminum alloys, copper, stainless steel, alloy steel, carbon steel. With 2 steps, 4 steps, special 4 steps Al. welding program, synergic welding function.
5.Special 4-step aluminum welding procedures: when welding aluminum, copper and good thermal conductivity metal, it is easy to lose heat when starting arc, the parent material is difficult to melt. With the special 4-step program, big current is used when starting arc , after the arc is started, the current is gradually reduced to normal welding current and then drop down to crater current to fill the crater when stop welding.
6, PM series with four roller wire feeder, and the dynamic response is several times of magnitude higher than traditional welding machines.
7, Can achieve the software upgrade of the welder, by changing the software to expand the welder function to meet a variety of different needs.
8, Suitable for artificial, mechanized, automated and robot welding industrials.
9, Widely used in stainless steel, galvanized sheet, chromium nickel steel and high alloy metal welding, and aluminum and aluminum alloy welding advantages are particularly evident.
PM-3000DP/5000DP Standard Accessories

 
Name PM-3000DP PM-5000DP
Closed 4 rollers wire feeder no 5m/50mm2 cable
Torch MB-24KD-3m
(Imported graphite wire feeding hose)
Water cooled 501D-3M
(Imported graphite wire feeding hose)
Earth Clamp 2.5M-25mm2/300A 2.5M-50mm2/500A
PM-3000DP/5000DP  Optional
PM-3000DP PM-5000DP
Cylinder tray rack (including large wheels) Integral trolley with cylinder tray rack (including large wheels)
NO Water tank WRC-300
CO2 regulator CO2 regulator
Argon regulator Argon regulator
NO Water cooling Fonius type torch AW5000-3M(USD30 higher than 501D)
PM-3000DP/5000DP Technical Parameter
Model PM-3000DP PM-5000DP
Voltage(V) 380V±10%   50/60Hz 380V±10%   50/60Hz
Input Power(KVA) 14 24
Rated Duty Cycle 60   60  
No-load Voltage(V) 60 70
Current Range(A) 20~300 20~500
Out put voltage Range(V) 14~30 14~50
feeding mode Push wire / push pool wire Push wire/ push pool wire
Gas(L/min) 10~20 10~20
Cooling Air cooling Air cooling/water cooling
Housing Protection Grade IP21S IP21S
Insulation Grade F F
L x W x H(mm) 590×280×700 550×280×590
Weight(Kg)) 35 Needle Part Mould:

Needle part mould refers to plastic Needle Hub Mould and plastic Needle Cap Mould. It is generally made from P20H and STAVAX steel. And customized mould steel for it is also available.

Needle part mould is of higher precision and more mould cavity than Syringe Mould, and its working life is also longer, even more than 5 million shots.

Mould Parameter:

Mould Life: 5,000,000 shots

Mould Cavity: Multiple cavities, can be customized

Runner Type: Cold runner, semi-hot runner

Mould Steel: Core and cavities: STAVAX

           Base: P20H

(the mould steel can be made at your request)

needle cap moldneedle seat mold

FAQ:

1. Are you a factory or trading company?

We`re definitely factory direct.

2. How about after-sale service?

One million shots is within defects liability period, and lifelong maintenance is offered.

3. Can we visit your factory?

Of course. We`re always looking forward to your visit.

Needle Part Mould

Needle Part Mould,Needle Hub Mould,Needle Cap Mould,Needle Mold

Yuhuan Zhengri Technology Co., Ltd. , http://www.syringemachine.com

Posted on