![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Photos of machine
Panel drawingÂ
Panel samples
We also can design and produce according to customer's panel drawing or requirment.
1. Components of roll forming machine:
| set of manual decoiler | Un-powered; Single head; Max.Capacity:5000kg; Coil inner-diameter:508mm |
| 1 set of main roll forming machines | Steps:13 Roller Material:45# steel Voltage:380V/50Hz. Line speed:12m/min; Rolling chromium thickness:0.05 mm |
| 1 set of  computer control cabinet | It adopts Taida PLC to control.The target piece length is adjustable and digit of it can be adjusted. 5.7 inch touch screen, easy to operate Computed mode has two modes:Automatic and manual one. |
| 1 set of  hydraulic System | It is controlled by gear wheel oil pump.After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job. Match equipment:A set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves. Power of the oil pump:3kw Hydraulic oil:40# |
| 1 set of cutting  mechanism | It adopts hydraulic drive and automatic location to decide the dimention and cut the target products. Match equipment:One set of cutting tool, one hydraulic tank, one cutter machine. Stop to cut, Post cut cutting length tolerance:± 2mm Cutting tool material:GCr12 with quenched treatment 60-62° C |
| 1 set of  counter | One counter gauges length, pulses, and decides length |
| 1 set of  output table | It used to load the forming plate |
2. Work flow of roof forming machine:
Decoiling the sheet----sheet guilding----film covering(option)----roll forming----PLC controlling----hydraulic cutting----receiving the finished panel
 3. Technical Parameters:
| No. | Main parameter of roof forming machine | |
| 1 | Suitable to process | Galvanized/Aluminum/Color steel sheet |
| 2 | Width of plate | 1250mm |
| 3 | Thickness of plate | 0.3-0.8mm |
| 4 | Rollers | High grade 45# steel, with hard chrome plating |
| 5 | Forming steps | 16 |
| 6 | Sprocket chain | 1.5 inch |
| 7 | Pump station power | 4kw |
| 8 | Shaft | 75mm, high grade 45# steel, heat treatment |
| 9 | Hydraulic oil pump | CB-E310 |
| 10 | Weight | About 5.0 tons |
| 11 | Productivity | 8-12m/min |
| 12 | Cutting head | Cr12 mould steel with quenched treatment |
| 13 | Control system | TAIDA brand PLC control |
| 14 | Voltage | 380V 3Phase 60Hz |
| 15 | Motor power | 4kw |
| 16 | Dimension | About 6.8m*1.5m*1.5m |
| 17 | Hydraulic pressure | 10-12mpa |
| 18 | Index error of length | ±1mm |
| 19 | The temperature range of working line | -35-50° |
4. Advantage of roof forming machine
| No. | roof forming machine |
| 1 | High grade quality |
| 2 | Reasonable price |
| 3 | High efficiency |
| 4 | Low failure rate |
| 5 | Low energy consumption |
| 6 | Free after-sale service |
| 7 | Reliable working |
| 8 | Durable |
| 9 | Wide application |
| 10 | Beautiful appearance |
| 11 | Welcomed by all over the world customers |
| 12 | Professional foreign trade team |
| 13 | Mature technician team |
| 14 | Customize special type |
Maybe you will ask these question
A:- What service can you provide before order?
- About the pre-sale service. We provide you answers of all your questions on our machines, such as technical parameter, price, payment terms, ect. If you wanna visit our factory and check the machines, we also can send you invitation letter and give you our warmest welcome.
B:- Can you finish the machine during the delivery time?
- We will finish the machine in time according to determined lead time.
C:- Can you provide some spare parts?
- Yes, of course. The quick-wear parts are sent to you together with the machine.
D:- What is the after- sale service?
- About the after-sales service. We can send technician to your country to fix the machine. The buyer should bear all the cost including: visa, Roundtrip ticket and suitable accommodation, also buyer should pay the salary 80USD/day.
E:- Any other service?
- We can manufacture, design, installation and debug various roll forming machines including standard and customized machines.
It is free to assemble machine and train your works, but the buyer should pay for the round-trip airplane ticket, and arrange accommodation during that time.
F: How to contact you
- You can call me or send message to me, my mobile: +8618231723279
If you want to know more information about Galvanized Roof Sheet Roll Forming Machine  for Africa market, Please contact to me Now!
Contact: Bella Hao   Mobile: 008618231723279Â
Single Screw SGP-VB Standard Nipple
External Screw Thread Nipple,Single Screw Nipples,Male Screw Nipple,External Male Thread Nipple
SHAOXING OGAWA PIPE CO.,LTD. , https://www.sxogawapipe.com