Seventy-two changes in centrifugal pump seventy-two change

A report from the centrifugal pump market in 2006 showed that:

2006 centrifugal pump demand changes

Can be seen from the above table: Centrifugal pump demand season mainly concentrated in the summer, from the chart to see the supply also increased at this time in several areas in China in the continuous summer droughts also contributed to the pump sales rise, this time centrifugal pump Market basic supply and demand balance, there are two months in 2006 there is an imbalance between supply and demand, respectively, in January (in short supply) and May (oversupply), so centrifugal pump suppliers can be considered in May when Strengthen product promotion, sales, to meet market demand. However, the demand for centrifugal pumps in winter is not large but the enthusiasm of suppliers is very high. This may be due to the promotion of year-end results, but this will balance the demand and supply that may come as a result of the January 2007 increase So that it will not be in short supply.

It is estimated that China's property market will continue the fiery degree, and as the building water supply centrifugal pump sales will continue to maintain a high amount; the same time, the Beijing Olympic Games from the current there is more than a year, most venues are In the tense construction, the demand in Beijing in 2007 is expected to usher in a small peak. In the northern dry areas of Shanxi, Inner Mongolia and Gansu, drought conditions are more severe in summer and floods are more likely to occur in the south, which will all demand more pump products.

Let's look at several companies and their products that are more prominent in centrifugal pumps.

One of the suppliers: Hangzhou South Special Pump Co., Ltd.

Product: Vertical multistage centrifugal pump CDL series

Product Description: The CDL / CDLF series is a versatile product that delivers a wide range of media from tap water to industrial liquids, adapts to different temperature, flow and pressure ranges, CDL for non-aggressive liquids, CDLF for mild Corrosive liquid. CDL / CDLF is a non-self-priming vertical multistage centrifugal pump equipped with a standard motor. The motor shaft is directly connected with the pump shaft through a pump head coupling. The pull rod bolt fixes the pressure cylinder and the flow passage component to the pump head and the water inlet and outlet water Between paragraphs, the pump inlet and outlet in the pump at the same line; the pump can be configured according to the needs of intelligent protection device, the pump dry rotation, lack of phase, overload and other effective protection.

This series of pump applications: water filtration and transportation, water district zoning, charge supercharger, high-rise building pressurization, process water systems, cleaning systems, high pressure washing system, fire protection systems, cooling and air conditioning systems, boiler feed water and condensation System, machine tool, ultrafiltration system, reverse osmosis system, distillation system, separation system.

Edit Comment: CDL / CDLF series of vertical single suction multi-stage centrifugal pumps for the transport of water at room temperature and the physical and chemical properties similar to clear liquid. CDL / CDLF series of hot water pump medium temperature below 150 ℃.
Pump for the vertical installation, with a compact, small footprint characteristics, suitable for workers, mining enterprises, urban construction and civil life water supply and drainage, and central heating system.

The second of suppliers: Jiangsu Yinglang Technology Group Co., Ltd.

Product: Magnetic Drive Centrifugal Pump CQ, CQB, ZCQ

Product Description: CQ, CQB, ZCQ magnetic drive centrifugal pump is the working principle of the permanent magnet coupling centrifugal pump for new products, reasonable equipment, advanced technology, with sealed, no leakage, corrosion resistance, etc., its performance To reach the advanced level of similar foreign products.

Magnetic drive centrifugal pump CQ, CQB, ZCQ

Product parameters: technical parameters

Power 0.025 / 15 kw
Pressure 1.6MPa / 0.2MPa mPa
Temperature ≤ 100 ℃ ℃
Flow 15/1000 m3 / h
Other parameters
Uses Widely used in chemical, pharmaceutical, petroleum, electroplating, food,
Features Magnetic pump structure of water, beautiful appearance, small size, low noise,
Head 1.2 / 50 m

Edit Comment: This product is industrial advanced, beautiful appearance, in line with the pursuit of modern enterprise value and aesthetic needs.

Third of Suppliers: Shanghai Zhongtai Pump Co., Ltd.

Product: Plastic Centrifugal Pumps 102

Plastic centrifugal pump 102

Product Description: 101, 102, 103, 104, 105 pump series plastic centrifugal pump is a small plastic pump, the product structure of advanced, small size, light weight, power saving, acid and alkali , Good sealing performance, easy maintenance. Can be widely used in chemical, light industry, waste management and other fields transport acid, alkali, salt and other corrosive liquids.

Edit Comment: This product is compact and lightweight, easy to use, while corrosion resistance, energy saving, suitable for small and medium enterprises.

Edit Summary: Centrifugal pump industry competition is not only the competition of technology and cost, but also the operation and management, brand marketing strategy and other factors of the overall competition. From the table we can see that the production-oriented enterprises in the market dominated, we can divide them into two types of enterprises: Some enterprises rely on the advantages of labor resources OEM and middle and low product sales, formed a larger scale. Others are devoted to the research and development of new products and the promotion of brands. These enterprises have achieved some recognition and market share in the competition of well-known foreign brands. Trade-based enterprises also occupy a certain proportion of the market, this mode of operation is generally stronger, larger dealers set up companies, their own investment to set up sales outlets, recruiters, have their own warehouses and office locations , Directly open up their own terminal market or rely on part of the second batch of developers to open up the end market.

Although the proportion of centrifugal pump manufacturing enterprises shown in the table accounts for 50% of the market, there are not many enterprises with innovative capabilities. Creating their own brands and developing their own R & D capabilities are the major development directions for Chinese enterprises. The gap between our country and outstanding foreign enterprises is mainly in marketing and design and development capabilities, rather than production capacity.

From the supply situation in recent years, China's centrifugal pump market conditions are basically good, the enthusiasm of suppliers is high, but on the other hand, the development of China's centrifugal pump industry is still arduous task: Although the production of centrifugal pumps in our country is very Large, but each year the country also imports a number of pump products used in key areas, the main reason is that domestic equipment can not meet the special needs of both the technical and performance aspects of the relatively developed countries, the pump industry in China is still relatively backward, there is a certain Therefore, it is still the major task for the equipment manufacturing industry, especially the pump industry, to develop major technical equipment required for national economic development and national key construction projects and to actively promote the localization of major equipment and technologies.