Concentrator cutting machine safety technical operation procedures

1. Before cutting, it is necessary to check whether the motor wiring is reliable, whether the protective cover pressing screw and the grinding wheel clamping screw are tightened, and when the grinding wheel is turned by hand, the side must have no obvious yaw.

2. When cutting, the workpiece must be clamped with the workpiece clamp. It is forbidden to press the workpiece by hand.

3. The handle must be operated with the right hand. The human body cannot align the direction of the grinding wheel to prevent accidents.

4. The force should be appropriate during operation. If the pressure is too large, the speed of the grinding wheel will be reduced, which will affect the cutting efficiency.

5. It is strictly forbidden to cut wood with a cutting machine to prevent breaking and burning the cutting piece and injuring people.

Full Flow Hose Ends

Industrial Hydraulic Hose Fitting,Hydraulic Hose Industrial Fittings,Full Flow Teflon Hose End,Stock Full Flow Teflon Hose End

Kage Hardware Product Co., Ltd , http://www.kage-autofittings.com